This kit will turn your Grip-Add on head into a Full Grip with rear wheels support and rail. Please note you can also purchase this configuration without rail if you wish to upgrade your PiBurn V3 tailstock to V4.
These come standard with your Grip! Order these if you need a spare set of these extended jaws or if you want to double stack them for extra reach What’s included: (3x) Extended Jaws (6x) M4x10mm Socket Head Screws
Quality Aluminum CNC machined feet for mounting your PiBurn or PiBurn Grip to a Fiber Laser. Note: PiBurn is not included, this product includes only the Fiber laser bed feet and all the required hardware to mount your PiBurn on your Fiber or CO2 Galvo Laser Bed.
Compatible with beds that have standard hole spacing of 25mm
This mount allows you to attach your PiBurn Grip Addon to most galvo style laser bed with 25mm hole spacing
Comes with two screws to attach to the Grip bracket and two Thumb screws for fixating the Grip to the laser bed.
NOTE: Without back wheel support the Grip is not expected to hold heavy or very long objects.
This awesome dual-wheel clamp holds the object from the outside as opposed to the original clamp that presses down from the inside.
This is useful when you are working with items such as wine bottles, baseball bats and any other object that can't have a clamp inside of it.
The dual wheel system creates additional friction between the motor wheels and your object to give you super precise results.
Compatibility:
The Mega Clamp works only with PiBurn V4
If you have a PiBurn V3 AND have the metal clamp, the Mega Clamp is compatible. If you have the older plastic clamp, unfortunately, the Mega Clamp will not work.
This cable is for adding a rotary/motor plug to your laser. It connects directly to your stepper motor driver. One end is wired to GX-16 4 pin male socket connector and other end has loose "pigtail" wires (crimped to quality ferules) that you can install (screw in) into standard green terminal bocks of your stepper motor driver.
Cable is approximately 1 meter (about 3.3 ft) long
Introducing the PiBurn Alignment and Calibration Tumbler, the ultimate accessory for PiBurn users. This 20oz Save a Cup tumbler is designed to streamline your setup process, making it easier than ever to align your PiBurn rotary or Grip rotary to your laser gantry. But that's not all! It also serves as a practice canvas for your designs and helps you perform a 100mm test to dial in your steps with ease. It also includes a link to the PiBurn manual and a link to purchase more Tumblers (while supporting a great cause!)
Quick Alignment: Say goodbye to tedious setup times. This tumbler allows you to align your PiBurn rotary or Grip rotary to your laser gantry in a snap.
Easy Calibration: Perform a 100mm test effortlessly to dial in your steps, ensuring precise and accurate engraving every time.
Practice Makes Perfect: Use the tumbler as a practice canvas to try out your designs before committing to your final piece.
Quality Material: Save a Cup's premium 20oz tumbler, is built to last and perfect for both beginners and seasoned laser engraving enthusiasts.
Link to the PiBurn Manual: Never be stuck on a step, just scan the handy QR code that takes you to our manual.
Spare Jaw Sets for the PiBurn Grip Do you need a spare set of jaws for your Grip? We got you! Please choose from the options available: Standard, Short, and XL. All jaws are “toolless” meaning you can tighten them and remove them with your fingers. The XL tool do not come included with your...
Horizontal Rails for PiBurn. These items are only available to current PiBurn customers! If you do not have our product your order will be canceled. Mini Size is perfect for Fiber laser or Boss LS1416. Short is normally used for Boss LS1420. Lengths indicated are actual lengths of the rails (without other components) +/- 1 mm